延安附近想过夜电话联系

Linchuan precision specializes in the production and development of SMT steel mesh, serving more than 3000 customers and producing more than 200000 high-quality steel nets in 7 years
Focus on improving pass through rate for SMT Enterprises
lower production cost
0755-29749682
eighteen billion nine hundred and twenty-eight million four hundred and three thousand four hundred and thirty-five
Focus on improving pass through rate for SMT Enterprises
lower production cost
common problem
Your current position: home page / Sichuan Forest Information / common problem
 What is the thickness of SMT (PCB) steel mesh and how to choose it?
  • Source: Linchuan precision
  • Author: Lin Chuan precision
  • Reading: 674 times
  • Release time: July 25, 2020
The thickness of SMT (PCB) steel mesh is very important for SMT manufacturers. It is not only related to the SMT pass rate, but also directly related to the performance stability and durability of products put into the market in the future. Next, Lin Chuan Jingguan will share the thickness classification and thickness selection skills of SMT (PCB) steel mesh accumulated over the years. What are the SMT (PCB) steel mesh and the thickness classification of SMT (PCB) steel mesh: 1. Generally, the steel mesh manufacturers usually keep stock according to the steel sheets they often use. The commonly used thicknesses are: 0.1 mm, 0.12 mm, 0.13 mm, 0.15 mm, 0.18 mm, etc. The front 0.1 mm-0.15 mm is usually used for the production of solder paste mesh, and the back 0.18 mm is often used
  • Source: Linchuan precision
  • Reading: 2350 times
  • Release time: November 16, 2019
SMT steel mesh is one of the important materials in PCBA production process. It can help solder paste accurately Miss print on PCB pad. Whether it can be used correctly will affect the amount and shape of solder paste on PCB pad. The following is Lin Chuan's summary of the correct use of SMT steel mesh. 1. Keep the SMT steel mesh clean. 1. Clean (wipe) the steel mesh before use to remove the dirt carried in the transportation process. 2. After the steel mesh is used up, it should be cleaned in time and returned to the packing box and placed on the special storage rack 3. The steel mesh should be placed in the special shelf vertically, and the plates should be separated from each other (film can be pasted), and it is forbidden to stack and contact each other. For the steel mesh waiting for cleaning, it is not allowed to place it at will, so as to avoid the intention
  • Source: Linchuan precision
  • Reading: 2465 times
  • Release time: November 2, 2019
Some netizens often ask me whether only PCB board (circuit board) can open a steel mesh. In this case, Linchuan precision answers "yes". Why do some manufacturers say that they can't open it? Because the process of opening steel mesh with PCB board is a little complicated, and it needs to be copied. Some manufacturers have not advanced equipment or engineering technology problems, and often produce SMT steel mesh offset. For some reasons, this process is not carried out at all. The following is an introduction to the steel mesh information, which can be handed over to SMT steel network
  • Source: Linchuan precision
  • Reading: 2140 times
  • Release time: November 2, 2019
With the continuous development of SMT industry, the market demand for SMT steel mesh is also increasing. However, the technology of SMT steel mesh industry is uneven so far. It is difficult to distinguish what kind of SMT steel mesh is high quality only by looking at the appearance. Today, Linchuan precision introduces the selection method from process to function
  • Source: Linchuan precision
  • Reading: 1300 times
  • Release time: October 8, 2019
At present, many different types of laser stencils are used in the electronics industry from many different suppliers, but not all of them are the same. Due to the requirements of the steel mesh industry to be able to deliver goods quickly, in many cases. Just in time delivery is as important as the performance of the mesh. It is believed that about 50% of the defects on the SMT assembly line are caused by the printing process. SMT steel mesh has become a kind of commodity. Many suppliers of steel mesh are selling it. Sometimes, they just buy it according to its price without paying attention to the quality
  • Source: Linchuan precision
  • Reading: 1200 times
  • Release time: October 8, 2019
In the process of quality inspection of SMT patch, it was found that there were some solder paste on the surface of SMT. After understanding, it was known that it was misprinted. In order not to affect the overall effect of the paste, we need to clean up the misprinted solder paste. Do you have any feasible methods to share with us? If we just use the most traditional method, that is, using a small spatula to remove the solder paste from the misprinted board, it may cause some problems. So we don't recommend you to use this method
Hot products
Linchuan precision company SMT steel mesh Manufacturer
Main business: Laser steel mesh Nano steel mesh
Stepped steel mesh FG steel mesh
Service hotline: 0755-29749682/18928403435
Shenzhen Linchuan Precision Technology Co., Ltd
Hotline: 0755-29749682 18928403435
Email: xjx.smt@163.com
Customer service QQ: 254259787 591431201
Address: 2 / F, block C, Fengrun building, gushiu Huafeng Second Industrial Park, Xixiang, Bao'an District, Shenzhen

Guangming branch: No.16, shangshijia Road, tangxiawei third industrial zone, Guangming District, Shenzhen Yue ICP Bei No. 17051183


Scan for more
menu
Telephone About us share
shrink

Online Service

  • customer service  Click here to send me a message
  • customer service  Click here to send me a message
  • Miss Zeng
    eighteen billion nine hundred and twenty-eight million four hundred and three thousand four hundred and thirty-five
  • Mr. Luo
    eighteen billion nine hundred and twenty-three million seven hundred and sixty-eight thousand six hundred and fifty-seven
  • Scan for more